1. Pay attention to the high-temperature parts of the forming and heat sealing parts, and be careful of burns;

2. It is strictly prohibited to use foreign objects or reach into the moving parts to avoid accidents;

3. Regularly check the connection of the wire harness to avoid friction with other moving parts, damage to the wires, and causing short circuits and leakage;

4. Components such as molding, heat sealing, and indentation should not be subjected to excessive pressure to avoid affecting the service life of the packaging machine;

When starting the machine, the preheating temperature of each heating component can be appropriately increased. After the operation is stable, the preset 5. Temperature guarantee function can be appropriately lowered to protect the heating components;

6. Aluminum foil wrinkling phenomenon: Adjust the two knobs in front of the heat sealing module to adjust the height of the aluminum foil pressing rod on the left and right sides.

A blister packaging machine is a machine that uses transparent plastic film or film to form a blister, and uses heat sealing, bonding, and other methods to seal the product between the blister and the bottom plate. Aluminum plastic blister packaging machines are commonly used for packaging capsules, tablets, sugar coats, capsules, injections, shaped products, as well as medical devices, light food products, electronic components, and other blister sealing packaging.